(Beijing):86 010-80519140

(Beijing):86 010-89511994

(Tianjin):86 022-22985589

Manager:86 18911772555

Li Chunxu:86 17622852508(WeChat with the same number)

sweep

Pay attention to Xinhua Zhongrun

Gas turbine flowmeter It is a precision flow measurement instrument that can be used to measure the flow and total amount of liquids. Gas turbine flowmeters are widely used in metering control systems in fields such as petroleum, chemical industry, metallurgy, and scientific research. Gas turbine flowmeters equipped with sanitary connectors can be applied in the pharmaceutical industry.

Gas turbine flowmeter What are the advantages and working principles?

When using a gas turbine flowmeter, the gas flow promotes the rotation of the turbine blades through the flowmeter. The number of revolutions of the impeller is proportional to the volume of gas passing through the turbine flowmeter. A specially designed patented flow guide is installed at the inlet of the flowmeter, which accelerates the airflow entering the flowmeter as the flow rate increases. The guide is designed to eliminate potential fluid disturbances, such as vortices or asymmetric flows. The thrust on the turbine blades also increases simultaneously. This ensures that the flowmeter measures with high precision within tolerance ranges, accurately measuring even small flow rates. The airflow acting on the turbine blades is axial, and the turbine device is on the main drive shaft, which is equipped with high-strength ball bearings. After the gas passes through the turbine blades, the rotation of the turbine blades is reduced through a gear set. The pressure in the inlet channel is restored, and the channel design ensures optimized flow patterns. Gas turbine flowmeter.

1. Gas turbine flowmeters have high accuracy, low pressure loss, low initial flow, automatic tracking compensation for temperature, pressure, and flow, battery-powered, can output multiple signals, use imported bearings, have a long service life, and are easy to install and maintain. Intelligent speed flowmeters integrate flow, temperature, and pressure detection functions, can perform temperature and pressure compensation, and have advantages such as high accuracy, good repeatability, wide measurement range, and easy installation.

2. Gas turbine flowmeters are velocity meters for measuring the flow of gas media in closed pipelines. They are suitable for accurately measuring gas and other industrial gas quantities. Due to their small size, high accuracy, and good repeatability, they absorb advanced structures from similar foreign products, optimized design, and integrate theories of gas dynamics, fluid dynamics, and electromagnetism. They adopt advanced transmission structures and are newly developed products. Gas turbine flowmeter.

3. Gas turbine flowmeters are a new generation of flowmeters that integrate flow, temperature, and pressure detection functions, automatically compensating for temperature, pressure, and compression coefficients. They are ideal instruments for gas measurement in industries such as petroleum, chemical, electric power, metallurgy, industrial boilers, as well as for urban gas, natural gas regulation stations, and natural gas trade measurement. They feature low pressure loss, high accuracy, low starting flow, good vibration resistance, good performance against similar types, and a wide range.

How to install and connect the gas turbine flowmeter?

The gas turbine flowmeter is a new generation of high-precision, high-reliability precision measuring instrument developed based on the ISO9951 standard, combining domestic and foreign flowmeter technologies, integrating temperature, pressure, flow sensors, and intelligent flow integrators. It has low and high pressure measurement performance, multiple signal output methods, and low sensitivity to fluid disturbances, making the flowmeter capable of accurately measuring the cumulative amount of gas for commercial trade metering.