(Beijing):86 010-80519140

(Beijing):86 010-89511994

(Tianjin):86 022-22985589

Manager:86 18911772555

Li Chunxu:86 17622852508(WeChat with the same number)

sweep

Pay attention to Xinhua Zhongrun

　　Aichuang ITRON turbine flow meter The application range is very wide, and we definitely need to know its characteristics before using it in order to apply it better. If you are interested in this topic, let's take a look together, hoping to help some related people.

Aichuang ITRON turbine flow meters are widely used in various industries, so their applications are certainly broad. They can be seen in many industries. Moreover, the Aichuang ITRON turbine flow meter is a new type of intelligent instrument developed using advanced ultra-low power microcontroller technology, integrating turbine flow sensors and displays. It has obvious advantages such as compact structure, intuitive and clear readings, high reliability, immunity to external power interference, lightning resistance, and low cost. Within the linear flow range, its accuracy is about (0.5-0.1%), and even if the flow changes, the cumulative flow accuracy will not decrease. Additionally, during use, the reproducibility of the turbine flow meter can reach 0.05% in a short time. Of course, what everyone needs to do is to understand that as a velocity flow meter, its working principle is: the power of the flowing fluid drives the turbine blades to rotate, and the rotational speed is approximately proportional to the volumetric flow rate. The fluid volume indicated by the flow meter is based on the number of revolutions of the turbine rotor.

The ITRON turbine flow meter has high measurement accuracy, good repeatability, and stability. In addition, the range ratio of the turbine flow meter can reach 8-10. Under the same diameter, the maximum flow value of the turbine flow meter is greater than that of many other flow meters. Therefore, when using it, what everyone needs to do is to first convert the flow rate into the speed of the turbine, and then convert the speed into an electrical signal proportional to the flow rate. This flow meter is used to detect instantaneous flow and total cumulative flow. Its output signal is frequency, which is easy to digitize. We can also make it into a closed structure, and its speed signal is a non-contact measurement, so it is also very good for achieving high-pressure design. The output is a pulse digital signal proportional to the flow rate. It has the advantages of maintaining accuracy during transmission, easy accumulation, and easy sending to computer systems. Especially, the ITRON turbine flow meter has its induction coil and permanent magnet fixed on the housing. When the ferromagnetic turbine blades pass by the magnet, the magnetic resistance of the magnetic circuit changes, generating an induced signal. Its signal is amplified and shaped by an amplifier and sent to a counter or frequency meter to display the total cumulative flow.

The above article content is what I have introduced to you. Aichuang ITRON turbine flow meter If you are also curious, come and take a look quickly, I believe it will not disappoint you. That's all for today's content, hoping to bring you some help.