(Beijing):86 010-80519140

(Beijing):86 010-89511994

(Tianjin):86 022-22985589

Manager:86 18911772555

Li Chunxu:86 17622852508(WeChat with the same number)

sweep

Pay attention to Xinhua Zhongrun

Modern sensors have significant differences in principles and structures. How to reasonably select sensors based on specific measurement purposes, measurement objects, and measurement environments is the first problem to be solved when measuring a certain quantity.Pressure sensor sales manufacturerIt indicates that once the sensor is determined, the matching measurement methods and equipment can also be determined. The success or failure of the measurement results largely depends on whether the sensor selection is reasonable.

1. Determine the type of sensor based on the measurement object and measurement environment. To conduct specific measurements, it is essential to first consider what type of sensor should be used, which needs to be determined after analyzing various factors. Even when measuring the same physical quantity, there are various types of sensors with different principles to choose from. If a sensor of a certain principle is more suitable, then the choice of which type of sensor to use should be considered based on the characteristics of the measured object and the conditions of the sensor's use, followed by considering the specific performance indicators of the sensor.

2. Selection of sensitivity. Within the linear range, the higher the sensor sensitivity, the better. This is because the output signal corresponding to the measured changes is only beneficial for signal processing when the sensitivity is high.Pressure sensor sales manufacturerIt is important to remind everyone that when the sensor's sensitivity is high, external noise can be amplified by the system, affecting measurement accuracy. Therefore, the sensor itself should have a high signal-to-noise ratio to reduce interference signals introduced from the external environment.

3. Frequency response characteristics. The frequency response characteristics of the sensor determine the frequency range to be measured, so it is necessary to maintain undistorted measurement conditions within the allowable frequency range. A sensor with high frequency response can measure a wide range of signal frequencies. However, due to structural characteristics, low-frequency sensors can measure signals at lower frequencies, and the inertia of mechanical systems is larger. In dynamic measurements, the response characteristics should be based on the characteristics of the signal to avoid excessive errors.

4. Stability. The ability of a sensor to maintain its performance unchanged after being used for a period of time is called stability. The main factors affecting the long-term stability of a sensor are the operating environment of the sensor and the structure of the sensor itself. Therefore, the sensor needs to have strong environmental adaptability to maintain stability. The operating environment should be investigated, and before selecting a sensor, a suitable sensor should be chosen based on the specific operating environment, or appropriate measures should be taken to reduce the impact of the environment.

5. Accuracy. It is an important link related to the measurement accuracy of the entire measurement system and is a key performance indicator of precision sensors. The higher the accuracy of the sensor, the more expensive it is. Therefore, pressure sensor sales manufacturers suggest that the accuracy of the sensor does not need to be too high; it only needs to meet the accuracy requirements of the entire measurement system. This way, a cheaper and simpler sensor can be selected from many sensors that meet the same measurement purpose. If the purpose of the measurement is qualitative analysis, a sensor with high repeatability should be chosen instead of one with high absolute accuracy. If accurate measurement values are needed for quantitative analysis, a sensor with an accuracy level that meets the requirements should be selected.